DIY Target Fall and Halloween Crafts

Fall is my favorite season of the year especially when I can DIY some Fall and Halloween crafts. The air gets a little bit cooler and I feel like the leaves falling makes it feel magical. Not to mention pumpkin spice EVERYTHING!

Browsing through Target one day, I came across the section in the beginning of the store (aka: the Dollar Spot) with all of the DIY Fall and Halloween crafts and cheap buys. So, I decided to give it a try. The first one I will talk about is the DIY Fall craft.

I bought 3 things from Target for this craft – the “Hello Fall” sign and the 2 fences. Each thing cost $3. So, together the total cost was $9. However you would need to get a couple more things to complete the project if you don’t already have them.


  1. The 3 items from Target – $9
  2. Paint- small bottles of acrylic paint $1.79
  3. Glue gun – $10
  4. Metallic pens – $1
  5. Permanent marker – $1
  6. Antique wax – $7
  7. Tree twigs – FREE from outside

I already had all of these items. So, for me it only cost $9. I had leftover white paint in the garage and the small acrylic paints from a previous project. However, if you don’t have these items you can find them at any craft store. The brand I used is called Folk Art. The orange color is called pumpkin and the yellow is called school bus.

Step 1. Paint the sign and fence white.

Step 2. Use your permanent marker and trace the lines in the pumpkin. This is so it pops out when you paint it and don’t loose the lines.

Step 3. Paint the pumpkins and “Hello Fall” words. I painted the words in the pumpkin paint color. The 3 pumpkins I used the school bus yellow, white, and pumpkin paint color.

Step 4. Paint the edge of the sign in the school bus yellow paint.

Step 5. Apply the antique wax on everything – sign, fences, pumpkins, “Hello Fall”. I used 2 paper towels to apply it. One was to spread and the other one was to wipe excess.–google–MICH_Shopping_US_N_Craft+%26+Hobbies_N_Smart_BOPIS_N-_-&Kenshoo_ida=&kpid=go_cmp-9972406265_adg-99939223639_ad-433378147590_pla-1354477352600_dev-c_ext-_prd-10673351&gclid=CjwKCAjw1JeJBhB9EiwAV612y2uWSZso5TBrxu0acyGfwTV-Uxichu6N_qLdorUENeDIwA6suxaElRoC1I8QAvD_BwE

Step 6. Use the gold metallic marker. I outlined the “Hello Fall” words and the pumpkins.

Step 7. Glue the fences to the back of the sign.

Step 8. Gather some tree twigs from outside and glue them to the fence.

DIY Halloween Craft

Target had this house trio for $5. It was plain wood and ready for crafting. I thought it would be a cute way to create haunted houses.

Step 1. Paint all the houses black. While the paint was wet I sprinkled glitter to cover the top of the roof section.

Step 2. I painted the doors and windows on each house. I alternated colors to make them look different.

Step 3. I used a permanent marker and drew the lines in the windows and added door knobs.

Step 4. Add Halloween elements. I didn’t take pictures of each added detail because that would of been a lot of pictures. I used paint pens and drew on the houses for each design. I alternated themes on each house to create differences. Online they have tutorials on how to draw some of these items. Links below:

That’s it folks! I hope this helps you make some Fall and Halloween crafts. Good luck and happy crafting! πŸ™‚

DIY Staircase Remodel

In my house, the staircase is the first thing you see when you come in. My stairs wasn’t in bad shape to begin with which was nice. However, I wanted something bold. I wanted to create a “WOW factor” if you will. Something that makes you say, “Dang that’s different and cool!” So, one day I was walking in Home Depot and I saw these vinyl peel and stick floor tiles. Then it was like a light bulb went off. It was a super easy, durable (and cheap) option.


  1. Vinyl floor tiles – $15/box of 10 tiles X 5 = $75
  2. Utility knife – $8
  3. Tape measurer – $5 (I already had)
  4. Vinyl floor adhesive – $15
  5. 1 quart of black paint = $22

TOTAL = $125

My stairs already had wood treads and iron balusters, so an update wasn’t super needed. However, I’m so in love with the way this turned out. Also, it was super easy! πŸ™‚

Step 1. Clean the stairs. Make sure all the dust and debris is all gone.

Step 2. Prep your area. I have painted so much now that I don’t need to tape off areas. I’m pretty good with keeping it in the lines. But if you need to use masking tape go ahead and mask off areas that don’t need paint.

Step 3. Paint the stair railings and posts. I did 2 coats. I used Behr paint color called Limousine Leather in the satin finish. I recommend getting a satin or gloss finish since this is a high traffic area. Matte paints chip easier.

Step 4. Applying the vinyl floor tiles. First thing you want to do is measure the height of your stairs. For my stairs, it took 4 tiles per step. I started right to left. You want to make sure you do each step in the same direction and pay attention to how the design goes. Use your measure tape and mark the spot on tile. Then cut the tile with your utility knife. I used a leveler to make sure it was straight and level. You will make the cut then bend the tile so it pops into 2 pieces.

Step 5. Apply the adhesive. So these tiles already have adhesive backing. However, these tiles are standing up and not laying down on the floor. So, to make sure gravity doesn’t take it you will apply vinyl adhesive.

AND THAT’S IT FOLKS! It is super easy and affordable! Here is a little tip though. After I cut my first piece I kept it to use as a guide for my next piece so I didn’t have to measure height for every floor tile. I would lay it on top of new piece so I knew where to cut also it made sure it was straight every time. I’m so in love with it! I feel like it brings so much style to the space and gives a great first impression when you walk into my house. πŸ™‚

How to Mortar Wash Your Fireplace

Have you heard the term “Mortar wash?” or “German Smear?” (thanks to Joanna Gaines) This term basically means slathering your fireplace with mortar to give it texture and depth. Also, makes your fireplace have a cozier look and it really gives your home a cottage feel. It’s actually pretty simple too!


  1. Thin Set Mortar – $20.98
  2. Bucket – $10 (I already had)
  3. Sponge -$5 (I already had)
  4. Gloves – $5 (I already had)
  5. Flexible Putty Knife – $5

Total = roughly $45 (SUPER CHEAP)

I bought already mixed thin set white mortar at Home Depot for around $20. You can buy the powder version and mix it yourself if you have the materials and if you have a bigger project.

Step 1. Get a damp cloth and wipe your fireplace down to get dust and debris removed.

Step 2. Get your bucket and a tarp if you have it to protect your floors. The tarp is nice because it is water resistant. This project can get a little messy at times.

Step 3. Apply mortar with putty knife. I feel like the putty knife is the easiest tool to use to apply it. This is the 3rd fireplace that I have done. Others have used the sponge or a towel. Also, remember to put on gloves. I have made the mistake of using my bare hand at times and it dries out your skin REAL BAD!

Step 4. After you put the mortar on (I usually do one or two bricks at a time) I get my sponge and bucket of water and I smooth out the brick. Remember to get into the grooves and completely fill those areas. I usually start there and work towards the brick.

And that’s it folks! Yeah it’s that easy. Keep in mind that you can always add more if you want more coverage. It’s best to be conservative at first if you want to see some of the underlying brick. I actually did that on this project and loved the results.

Also, if anyone was wondering what color that was on the mantle. I painted it with Behr paint color is called Shark Fin.


DIY antique pantry door

Do you love the antique door style but come up short finding one? It definitely makes an impression in the kitchen and brings in more style. With the right materials you can create the look without having to find one in the antique store.

I had a boring builder grade hollow door in my kitchen. I came up with the idea of modifying it after wasting time at the antique shops. (Also saved some money while I was at it!) πŸ™‚ With the help of Amazon and a little creativity I found materials to add to the door that made it look a little more special.


  1. Paint – Behr Chalk Paint in Classic Noir $19.99
  2. Wax – Behr Dark Wax $14.98
  3. Rope moulding 115″- $17.60 X3
  4. Glass Door Knob – $29.99
  5. Wood Appliques – $11.95 + $8.99
  6. Glue – Gorilla Glue $4.8

Total Cost = $143.54


Step 1 – Get your materials together – you’ll need a straight edge knife to cut the rope moulding and I used spackling to fill holes around it….more on that later

Step 2 – Clean your door with soap and water. Makes sure your door is dry before applying the appliques.

Step 3 – Apply the wood appliques and rope moulding with Gorilla glue.

I found basically all of my materials on Amazon. I’m a huge fan since I can get it shipped to me pretty quick. The rope moulding is flexible almost rubber consistency. It can be cut with a straight edge knife (which is SUPER EASY!) Make sure that you cut the edges at a 45 degree angle. I didn’t use a tape measurer. I measured and cut the moulding by laying it down on the door and cutting where needed. After I cut the moulding I glued it down with Gorilla Glue super gel. It dries so fast and adhered so well. I was IMPRESSED!

Now that I applied the moulding and wood appliques it’s time to prep for paint. I’m not super great with cutting the edges perfectly which left some holes in the corners. So, to fix that I applied some wall spackling to fill the areas. To show you an example, I will show you in a picture below:

I put on some gloves and used my finger to spread it on. I felt like that was so much easier and I could just throw away the gloves afterwards.

Step 4 – Let’s Paint! I used Behr chalk paint from Home Depot.

At first, I was just going to paint with the chalk paint but then I thought layering with different colors would bring out more depth when I distress it later. So, I painted it with some paint I had in the garage. I painted it with Behr color – Shark Fin (which I’m obsessed with!) It’s a pretty medium grey color. This doesn’t have to be perfect. It really just needs a light coverage.

Next, I painted it with the black chalk paint. I didn’t even wait until it was totally dry. Chalk paint is so easy to paint with and I was ok with it sort of mixing. It gave it a more dimensional look.

Step 6 – Distressing

This is the fun step. I used a 100 grit sanding block and sanded it by hand. You can use just a sheet of sandpaper or a sander if you have it. It’s good to focus on the edges to create the worn look. Afterwards, you wipe down the door with a damp cloth to get rid of the remaining dust.

Step 7 – Waxing. You can apply the wax with a brush or a rag whichever is easier for you. You just want to get full coverage and especially over high traffic areas. The wax will protect your paint from chipping.

Step 8 – Putting on the new door knob. It’s so much easier than I thought it was going to be. The instructions are easy to follow and shows you step by step in pictures.

And that’s it folks! I hope this helps you recreate your old pantry door and give you a fantastic new one. πŸ™‚

VRae Designs

Born in Louisiana and recently moved to the Georgia area. Growing up my mother was always decorating and redecorating. She had experience in interior design and was in the real estate market. Now that I’m on my own, I have taken her sense of design and eagerness with me. Always looking for projects around the home that I can DIY. So, I decided to capture these moments and share it with everyone. Hopefully, this will give you the inspiration to create some creative spaces around your home. Now let’s have some fun!